Menu
Menu
Alternator Accessories
Belt Buddy Universal Tension Adjustment System
Reduce your installation time and frustration! Many installers rely on the Belt Buddy Universal Adjustment Arm for alternator installations and belt tensioning. Precision cut and power coated for protection from corrosion, the Belt Buddy can be purchased as a kit or by individual component.
| Part Number | Description |
|---|---|
| UBB | Universal Adjustment Arm & Belt Buddy Combination. This is the complete assembly (UBB = UAA + BB), designed for adjusting belt tension and providing a positive stop for no slipping. |
| UBB2 | This is the UBB with a 1/2″ Offset in the UAA for certain mounting applications. |
| UAA | Universal Adjustment Arm Only. The UAA provides a longer, more positive arm for alternator adjustment. |
| UAA2 | This is the UAA with a 1/2″ Offest for certain mounting applications. |
| BB | Belt Buddy for the UAA. The BB adjustable mechanism converts your existing UAA or UAA2 to a UBB or UBB2 . |
| BBU | Belt Buddy for Any Adjustment Arm. This product is designed to fit on your existing tensioning arm, thereby converting it to our Belt Buddy System. |
Yanmar Installation Hardware Kits
Pre-matched hardware Kits for various Yanmar engines can save time and frustration. 6-0020 Kit is required for all AT-Series Alternators. 6CX and 6LP kits include the required pulleys.
| Part Number | Description | Yanmar Engine Model |
|---|---|---|
| 6-0020 | Install Hardware Kit | GM, JH, LH, LY |
| 6-0030 | Install Hardware Kit | 6CX |
| 6-0040 | Install Hardware Kit | LP, 6LP |
Alternator Rebuild Kits
Kits vary by alternator model, but all provide the most commonly needed components, such as bearings, brushes, and complete regulator/rectifier assemblies. Balmar strongly recommends that a qualified alternator repair shop be used to complete a repair or rebuild.
| Part Number | Description | Alternator Series |
|---|---|---|
| 7060 | Rebuild Kits | 6-Series (12V) |
| 7060-24 | Rebuild Kits | 6-Series (24V) |
| 7090 | Rebuild Kits | 90-Series (12/24V) |
| 7094 | Rebuild Kits | 94-Series (12/24V) |
| 7095 | Rebuild Kits | 95-Series (12/24V) |
| 70-AT-165 | Rebuild Kits | AT-Series (165A) |
| 70-XT-170 | Rebuild Kits | XT-Series (170A) |
| 70-AT-200 | Rebuild Kits | AT-Series (200A) |
| 70-XT-250 | Rebuild Kits | AT-Series (250A) |
Alternator Pulleys & Mounting Spacers
Balmar offers an extensive selection of pulleys, belts & mounting spacers for its Small, Large and Extra-Large Frame Alternators. Pulley models vary by bore (17mm and .875”), outside diameter, belt width and type, and rear shoulder width. Balmar pulleys are anodized steel, unless otherwise noted. Identify your required pulley geometry in the tables below and click on the part number link to review a picture and further information.
| Part Number | Description | Type |
|---|---|---|
| 6-Series and 94-Series Pulley Accessories | ||
| 1303 | Pulley, Single 2.2″ x 1/2″ V, 17mm Bore | Single Vee |
| 61-0010 | Pulley, Single 2.7″ x 1/2″ DeepV, 17mm Bore (Std SV on 6-Series) | Single Vee |
| 1315 | Pulley, Single 3.0″ x 5/8″ V, 17mm Bore | Single Vee |
| 24-2100 | Pulley, Single 3.4″ x 1/2″ V, 17mm Bore | Single Vee |
| 1305 | Pulley, Dual 2.2″ x 7/16″ V, 17mm Bore | Dual Vee |
| 4038-CAM | Pulley, Dual 2.7″ x 1/2″ V, with 3/8″ Spacing, 17mm Bore | Dual Vee |
| 61-0020 | Pulley, Dual 2.7″ x 1/2″ DeepV, 17mm Bore (Std DV on 6-Series) | Dual Vee |
| 61-0060 | Pulley, Dual 2.7″ x 1/2″ V, 17mm Bore, (For Yanmar 6CX) | Dual Vee |
| 2763 | Pulley, Dual 2.7″ x 5/8″ V, 17mm Bore | Dual Vee |
| 5908MPV | Pulley, Dual 2.9″ x 1/2″ V, 17mm Bore | Dual Vee |
| 1330 | Pulley, Dual 2.9″ x 1/2″ DeepV, 17mm Bore | Dual Vee |
| 1318 | Pulley, K6 1.9″ Serpentine, 17mm Bore | 6 Groove Serpentine |
| 1273 | Pulley, K6 2.3″ Serpentine, 17mm Bore | 6 Groove Serpentine |
| 1316 | Pulley, K6 2.4″ Serpentine, 17mm Bore | 6 Groove Serpentine |
| 61-0070 | Pulley, K6 2.45″ Serpentine, 17mm Bore (Std K6 on 6-Series) | 6 Groove Serpentine |
| 2749B | Pulley, K6 2.7″ Serpentine, 17mm Bore | 6 Groove Serpentine |
| 1310 | Pulley, K8 2.4″ Serpentine, 17mm Bore, Short (Std) | 8 Groove Serpentine |
| 1311 | Pulley, K8 2.4″ Serpentine, 17mm Bore, (Cummins) | 8 Groove Serpentine |
| 95-Series, 97-Series, 97EHD-Series and 98-Series Pulley Accessories | ||
| 5535-B | Pulley, Dual 2.7″ x 1/2″ V, .875″ Bore | Dual Vee |
| 5540 | Pulley, Dual 2.7″ x 5/8″ V, .875″ Bore | Dual Vee |
| 5570 | Pulley, Dual 3.6″ x 5/8″ V, .875″ Bore | Dual Vee |
| 59473 | Pulley, Dual 2.9″ x 1/2″ V, .875″ Bore | Dual Vee |
| 5550 | Pulley, Triple 2.9″ x 1/2″ V, .875″ Bore | Triple Vee |
| 5552 | Pulley, K6 2.7″ Serpentine, .875″ Bore | 6 Groove Serpentine |
| 5539 | Pulley, K8 2.5″ Serpentine, .875″ Bore | 8 Groove Serpentine |
| 5537-B | Pulley, K8 2.7″ Serpentine, .875″ Bore | 8 Groove Serpentine |
| 6-Series & 9-Series Mounting Spacers | ||
| 10-4048 | Spacer, 1/4″ Width, 1.0″ Diameter | |
| 10-4000 | Spacer, 1/2″ Width, 1.0″ Diameter | |
| 10-4047 | Spacer, 1.0″ Width, 1.0″ Diameter | |
Showing 41–57 of 57 results
Balmar Technical Support Department is available 8:00 am – 6:30 pm EST, Monday – Friday
