Charging System Accessories

Alternator Accessories

Belt Buddy Universal Tension Adjustment System

Reduce your installation time and frustration! Many installers rely on the Belt Buddy Universal Adjustment Arm for alternator installations and belt tensioning. Precision cut and power coated for protection from corrosion, the Belt Buddy can be purchased as a kit or by individual component.

 

Part
Number
              Description
UBB  Universal Adjustment Arm & Belt Buddy Combination.
This is the complete assembly (UBB = UAA + BB), designed for adjusting
belt tension and providing a positive stop for no slipping.
UBB2  This is the UBB with a 1/2″ Offset in the UAA for certain mounting applications.
UAA  Universal Adjustment Arm Only.
The UAA provides a longer, more positive arm for alternator adjustment.
UAA2  This is the UAA with a 1/2″ Offest for certain mounting applications.
BB  Belt Buddy for the UAA.
The BB adjustable mechanism converts your existing UAA or UAA2 to a UBB or UBB2 .
BBU  Belt Buddy for Any Adjustment Arm.
This product is designed to fit on your existing tensioning arm,
thereby converting it to our Belt Buddy System.

Yanmar Installation Hardware Kits

Pre-matched hardware Kits for various Yanmar engines can save time and frustration.  6-0020 Kit is required for all AT-Series Alternators. 6CX and 6LP kits include the required pulleys.

 Part Number Description  Yanmar Engine Model
6-0020 Install Hardware KitGM, JH, LH, LY
6-0030 Install Hardware Kit6CX
6-0040 Install Hardware KitLP, 6LP

Alternator Rebuild Kits

Kits vary by alternator model, but all provide the most commonly needed components, such as bearings, brushes, and complete regulator/rectifier assemblies. Balmar strongly recommends that a qualified alternator repair shop be used to complete a repair or rebuild.

 Part Number Description  Alternator Series
7060Rebuild Kits6-Series (12V)
7060-24Rebuild Kits6-Series (24V)
7090Rebuild Kits90-Series (12/24V)
7094Rebuild Kits94-Series (12/24V)
7095Rebuild Kits95-Series (12/24V)
70-AT-165Rebuild KitsAT-Series (165A)
70-XT-170Rebuild KitsXT-Series (170A)
70-AT-200Rebuild KitsAT-Series (200A)
70-XT-250Rebuild KitsAT-Series (250A)

Alternator Pulleys & Mounting Spacers

Balmar offers an extensive selection of pulleys, belts & mounting spacers for its Small, Large and Extra-Large Frame Alternators. Pulley models vary by bore (17mm and .875”), outside diameter, belt width and type, and rear shoulder width. Balmar pulleys are anodized steel, unless otherwise noted.   Identify your required pulley geometry in the tables below and click on the part number link to review a picture and further information.

 Part Number  Description Type
 6-Series and 94-Series Pulley Accessories 
1303  Pulley, Single 2.2″ x 1/2″ V, 17mm Bore  Single Vee
61-0010  Pulley, Single 2.7″ x 1/2″ DeepV, 17mm Bore (Std SV on 6-Series) Single Vee
1315  Pulley, Single 3.0″ x 5/8″ V, 17mm Bore Single Vee
24-2100  Pulley, Single 3.4″ x 1/2″ V, 17mm Bore Single Vee
1305  Pulley, Dual 2.2″ x 7/16″ V, 17mm Bore Dual Vee
4038-CAM  Pulley, Dual 2.7″ x 1/2″ V, with 3/8″ Spacing, 17mm Bore Dual Vee
61-0020  Pulley, Dual 2.7″ x 1/2″ DeepV, 17mm Bore (Std DV on 6-Series) Dual Vee
61-0060  Pulley, Dual 2.7″ x 1/2″ V, 17mm Bore, (For Yanmar 6CX) Dual Vee
2763  Pulley, Dual 2.7″ x 5/8″ V, 17mm Bore Dual Vee
5908MPV  Pulley, Dual 2.9″ x 1/2″ V, 17mm Bore Dual Vee
1330  Pulley, Dual 2.9″ x 1/2″ DeepV, 17mm Bore Dual Vee
1318  Pulley, K6 1.9″ Serpentine, 17mm Bore  6 Groove Serpentine
1273  Pulley, K6 2.3″ Serpentine, 17mm Bore 6 Groove Serpentine
1316  Pulley, K6 2.4″ Serpentine, 17mm Bore 6 Groove Serpentine
61-0070  Pulley, K6 2.45″ Serpentine, 17mm Bore (Std K6 on 6-Series) 6 Groove Serpentine
2749B  Pulley, K6 2.7″ Serpentine, 17mm Bore 6 Groove Serpentine
1310  Pulley, K8 2.4″ Serpentine, 17mm Bore, Short (Std) 8 Groove Serpentine
1311  Pulley, K8 2.4″ Serpentine, 17mm Bore, (Cummins) 8 Groove Serpentine
 95-Series, 97-Series, 97EHD-Series and 98-Series Pulley Accessories
 5535-B  Pulley, Dual 2.7″ x 1/2″ V, .875″ Bore Dual Vee
5540  Pulley, Dual 2.7″ x 5/8″ V, .875″ Bore Dual Vee
5570  Pulley, Dual 3.6″ x 5/8″ V, .875″ Bore Dual Vee
59473  Pulley, Dual 2.9″ x 1/2″ V, .875″ Bore Dual Vee
5550  Pulley, Triple 2.9″ x 1/2″ V, .875″ Bore Triple Vee
 5552  Pulley, K6 2.7″ Serpentine, .875″ Bore 6 Groove Serpentine
5539  Pulley, K8 2.5″ Serpentine, .875″ Bore 8 Groove Serpentine
5537-B  Pulley, K8 2.7″ Serpentine, .875″ Bore 8 Groove Serpentine
 6-Series & 9-Series Mounting Spacers
 10-4048  Spacer, 1/4″ Width, 1.0″ Diameter
 10-4000  Spacer, 1/2″ Width, 1.0″ Diameter
 10-4047  Spacer, 1.0″ Width, 1.0″ Diameter